Fujitsu FI-6670A 소모품 교체 및 청소 지침 - 페이지 15
{카테고리_이름} Fujitsu FI-6670A에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-6670A 22 페이지. High speed colour duplex scanner
Fujitsu FI-6670A에 대해서도 마찬가지입니다: 사용자 설명서 (26 페이지), 설치 절차 매뉴얼 (6 페이지), 사양 (2 페이지)
페이지 인쇄
C
ADF (
LEANING THE
CONT
C
ADF R
LEANING THE
OLLERS
Dirty ADF Rollers will cause frequent jams.
•
Clean the two sets of
Urethane Rollers with a lint
free cloth moistened with F1
Cleaner or isopropyl alcohol.
Both of these sets of rollers
are located on the top section
of the ADF.
Note:
To properly clean the complete surfaces of the rollers hold down the
[S
] and S
Buttons on the Operator Panel simultaneously. The
ENT TO
CAN
rollers will rotate to a new position.
[Scan] Button
[Send to] Button
Function
Scan / Stop
Check
Send to
fi-6670(A)
•
Clean the two sets of Plastic Rollers with a lint free cloth moistened
with F1 Cleaner or isopropyl alcohol. Both of these sets of rollers are
located on the bottom section of the ADF.
C
T
P
LEANING THE
RANSPORT
Dirty Sheet Guides can cause paper jams, and also damage or mark the
paper. Dirty Glass Areas can cause image quality problems such as
vertical streaking, or faded image.
•
Wipe the two glass areas
(upper and lower), and the
two sheet guides with a lint
free cloth moistened with F1
Cleaner or isopropyl alcohol.
fi-6670(A) & fi-6770(A) C
.)
Plastic Rollers
Check
Function
Send to
Scan / Stop
Power
Power
fi-6770(A)
ATH
R
ONSUMABLE
EPLACEMENT AND
Urethane Feed Rollers
[Send to] Button
[Scan] Button
Glass Areas
Sheet Guides
C
I
LEANING
NSTRUCTIONS
15