Fujitsu fi-680PRF 운영자 매뉴얼 - 페이지 16

{카테고리_이름} Fujitsu fi-680PRF에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-680PRF 26 페이지. Imprinter

■ Back-Side Imprinter

Open the Back-Side Imprinter cover by pressing the

cover tab.

Align the top of the print position pointer with the

print position mark where printing should be

performed on the document.

 When setting a print cartridge, align the top of

！！

！

the print position pointer with the print position

mark where printing should be performed on the

document. Otherwise, printing may not be

performed properly, or the document may be

smudged with ink.

 Place the document in the stacker, and make

sure that the print cartridge is positioned within

the width of the document.

 The location of the print position pointer on the

cartridge holder corresponds to that of the print

head. It can be used as an indicator of a print

position.

 There is a scale for the paper size below the

print cartridge. It can be used as an indicator of

paper width.

Close the cover of the Back-Side Imprinter.

Print Position Pointer

Print Position Mark

2.4 Print Setup

You can configure the print setup for the Imprinter on the

scanner driver setup dialog box.

How to run the scanner driver differs depending on

the application.

For details, refer to the manual or help of the

application being used.

Available items are:

 Imprinter/Endorser to be enabled

 Printing (Offset, Direction, Font)

 Counter (Initial Value, Step, Counter)

 Imprinter String (Endorser)

For details, refer to the PaperStream IP Help.