Fujitsu fi-7140 시작하기 - 페이지 7

{카테고리_이름} Fujitsu fi-7140에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-7140 9 페이지.

Fujitsu fi-7140 시작하기
2.
Turn on the computer.
 The scanner is automatically detected.
ATTENTION
If the [Found New Hardware] dialog box
appears, select [Locate and install driver
software (recommended)], and follow the
instructions on the screen to install the
driver.
3.
Load a document in the scanner.
1. Pull out the chute extensions according to the
length of the document.
2. Pull the stacker out, slide stacker extension 1
and stacker extension 2 toward you
according to the length of the document, and
lift the stopper up.
3. Load the document face-down in the ADF
paper chute (Feeder).
4. Adjust the side guides to the width of the
document.
fi-7140
Side Guides
Stacker
Extension 1
Stacker Extension 2
Stopper
fi-7240
Chute Extension 2
Chute Extension 1
Side Guides
Stacker
Stopper
Chute
Extension 2
Chute
Extension 1
ADF Paper
Chute (Feeder)
Stacker
ADF Paper
Chute (Feeder)
4.
Start up PaperStream Capture.
Windows Vista
®
Windows
7
Select the [Start] menu  [All Programs] 
[PaperStream Capture]  [PaperStream
Capture].
Windows Server
Right-click the Start screen, select [All apps]
on the app bar, and then select
[PaperStream Capture] under [PaperStream
Capture].
Windows Server
Click [] on the lower left side of the Start
screen, and then select [PaperStream
Capture] under [PaperStream Capture].
To display [], move the mouse cursor.
5.
Click the [Scan] button in the Menu Area.
6.
Click one of the three types of document
profiles that are prepared beforehand.
Below is an example of when the document
profile [Black and White] is clicked.
 The document is scanned, and the
scanned image is displayed.
7
®
®
/Windows Server
2008/
®
®
2012/Windows
8
®
®
2012 R2/Windows
8.1