Fujitsu fi-8190 운영자 매뉴얼 - 페이지 20

{카테고리_이름} Fujitsu fi-8190에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-8190 47 페이지. Image scanner
Fujitsu fi-8190에 대해서도 마찬가지입니다: 시작하기 (2 페이지), 시작하기 (2 페이지)

페이지 인쇄
Fujitsu fi-8190 운영자 매뉴얼
3
Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
4
Press the [
] button/[ ] button and select [4: Test Print], and then press the [Scan/Enter] button.
The [No. of sheets scanned] screen is shown on the LCD.
ATTENTION
If the Imprinter is disconnected or not connected properly, [Cannot use this function because the Imprinter
is not connected.] is shown on the LCD.
5
Press the [
] button/[ ] button and select [1: Single sheet only] or [2: Multiple sheets], then press
the [Scan/Enter] button to confirm.
When [2: Multiple sheets] is selected, printing is performed for all sheets set in the scanner.
The [Print Pattern] screen is shown on the LCD.
6
Press the [
] button/[ ] button and select a print pattern, and then press the [Scan/Enter] button.
For details about print patterns, refer to
The [Test Print] screen is shown on the LCD.
7
Press the [
] button/[ ] button and select [1: Yes], and then press the [Scan/Enter] button.
The blank sheets are fed into the scanner, and the imprinter will print out a print pattern leaving a 5 mm gap
(with an allowance of 4 mm inwards or outwards) from the edge of each document.
ATTENTION
Do not move the imprinter or give it a jolt while printing.
Printing may be out of order.
8
When you have finished running the test print, press the [Stop/Clear] button to return to the [Ready]
screen.
Print Patterns and the Results (page
20
Installation
22).