Fujitsu M3096GX 소모품 교체 및 청소 지침 - 페이지 7

{카테고리_이름} Fujitsu M3096GX에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu M3096GX 12 페이지. Departmental document scanners
Fujitsu M3096GX에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지)

페이지 인쇄

eplaCinG the

iCK

•

Take the new Pick Roller and place the retaining hook on the end of

the shaft closest to the black sponge roller.

Retaining Hook

Bushing

•

Place the bushing that has the flat spot on the end of the roller shaft

where you placed the retaining hook. Make sure the large diameter

of the bushing is facing the inside of the shaft. Also, make sure the

hook and bushing are as close to the roller as possible.

Back of Scanner

Bushing

M3096EX/GX C

(

olleR

Cont

•

Place the round bushing into

the mounting hole at the rear

of the ADF.

Round

Bushing

•

Place the end of the roller

shaft with the bushing into

the retaining bracket in the

center of the ADF.

•

Now slide the roller shaft

into the mounting hole and

bushing in the back of the

scanner.

•

Make sure the bushings

are placed in the mounting

holes properly and move

the retaining hook into the

groove in the roller shaft.

•

Reinstall the Pick Roller

Cover and tighten the two

thumb screws.

onsuMablE

EplaCEMEnt and

lEaninG

nstRuCtions