Fujitsu M3099G 설치 절차 매뉴얼 - 페이지 7

{카테고리_이름} Fujitsu M3099G에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu M3099G 9 페이지. Scsi scanner installation procedures for windows nt 4.0
Fujitsu M3099G에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지)

페이지 인쇄
Fujitsu M3099G 설치 절차 매뉴얼
Fujitsu SCSI Scanner Installation Procedures
Step E: Unlocking the shipping lock.
If your model scanner does not have a flatbed then proceed to Step F.
The flatbed model scanners typically include a lock on the flatbed designed to protect
the scanner during shipment. Before the scanner can be used the shipping lock must be
unlocked. To unlock it do the following:
1. Located the shipping lock slider tab or knob underneath the end of the scanner.
2. Slide or rotate the lock to the unlock position.
If your model has the old style "L" bracket shipping lock.
3. Slide the scanner to its side as shown in figure below.
4. Unscrew the retainer screw and remove the shipping bracket.
5. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure below).
6. Place scanner back in its normal position.
Rev051906A
Windows NT 4.0
Page 7 of 9