Brother DCP-340CW 빠른 설정 매뉴얼 - 페이지 7

{카테고리_이름} Brother DCP-340CW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-340CW 43 페이지.
Brother DCP-340CW에 대해서도 마찬가지입니다: 서비스 매뉴얼 (11 페이지)

Fan the stack of paper well to avoid paper jams

and misfeeds.

Gently put the paper into the paper tray print

side down and top edge first.

Check that the paper is flat in the tray and

below the maximum paper mark (1).

Note

• Make sure the paper side guides touch the sides

of the paper.

• Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.

Put the output paper tray back on and push the

paper tray firmly back into the machine.

Installing the power cord

Connect the power cord.

Improper Setup

DO NOT connect the USB cable yet.

Connecting the USB cable is done during the

software installation process.

Warning

The machine must be fitted with an earthed plug.

Note

The control panel warning LED will stay on until

you have installed the ink cartridges.

After connecting the power cord, the LCD

shows:

Select Language

Press Set Key

Press Set.

Select Language

English

Press a or b to choose your language and

press Set.

English?

a. Yes b. No

If your language is chosen, press a (Yes).

If you have set the language wrongly, you

can change the language after setting the

date and time. (For details, see "How to

change LCD language" in Chapter 6 of the

User's Guide.)

Setting Up the Machine