Brother DCP-377CW 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Brother DCP-377CW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-377CW 29 페이지. Inkjet dcp/mfc
Brother DCP-377CW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (39 페이지), 부품 참조 목록 (32 페이지)
2
Attachment of the cover
of the control panel
a
Attach the cover of the control panel to the
machine.
3
Load plain A4 paper
a
Pull the paper tray completely out of the
machine.
b
Lift the output paper tray cover.
c
With both hands, gently press and slide the
paper side guides
guide
to fit the paper size you are loading in
b
the tray.
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
2
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
e
Check that the paper is flat in the tray.
IMPORTANT
DO NOT push the paper in too far.
f
Gently adjust the paper side guides to the
paper with both hands.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
b