Brother DCP-395CN 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Brother DCP-395CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-395CN 29 페이지. Quick setup guide (español) - english
Brother DCP-395CN에 대해서도 마찬가지입니다: 부품 참조 목록 (32 페이지), 빠른 설정 매뉴얼 (21 페이지), (영어) 빠른 구성 가이드 (28 페이지)
페이지 인쇄
Note
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• You need to purchase the correct interface
cable for the interface you want to use (for USB
or network connection).
USB cable
Please make sure you use a USB 2.0 cable (Type
A/B) that is no more than 6 feet (2 meters) long
(cable not included).
Network cable
Use a straight-through Category5 (or greater)
twisted-pair cable for 10BASE-T or 100BASE-TX
Fast Ethernet Network.
2
Load plain Letter/A4
paper
a
Pull the paper tray
machine.
b
Lift the output paper tray cover a.
1
2
completely out of the
a
1
c
With both hands, gently press and slide the
paper side guides
guide
to fit the paper size.
b
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
IMPORTANT
DO NOT push the paper in too far.
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
b