Brother DCP-8155DN 네트워크 매뉴얼 - 페이지 7

{카테고리_이름} Brother DCP-8155DN에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8155DN 29 페이지. Quick setup guide - english
Brother DCP-8155DN에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 고급 사용자 설명서 (50 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (23 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지), 고급 사용자 설명서 (39 페이지)

Configuration for Scan to Network using a Web Browser

Configuring the Scan to Network Default Settings

Start your web browser.

Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is the

IP address of the machine or the print server name).



For example: http://192.168.1.2/

No password is required by default. If you have previously set a password, enter it and press

Click Scan.

Click Scan to FTP/Network Profile.

Choose the Profile you want to configure in Scan to FTP/Network Profile.

You can configure and change the following Scan to Network settings using a web browser.

1 Enter the name that you want to use for the Scan to Network profile. This name will be displayed on

the LCD of the machine and can be up to 15 characters.

2 The Host Address is the domain name of the CIFS server. Enter the Host Address (for example

mypc.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).

3 Enter the destination folder where your document will be stored on the CIFS server (for example

brother\abc) (up to 60 characters).

4 Choose the file name you want to use for the scanned document. You can choose from seven preset

and two user defined file names. The file name that will be used for your document will be the file

name you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension

(For example, Estimate_098765.pdf). You can also manually enter a file name up to 15 characters.