Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 18
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 35 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (24 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
Connecting the USB Cable
■
Connect the USB cable as shown below.
• Use only the USB cable supplied with the ScanSnap.
ATTENTION
• When connecting to a USB hub, be sure to connect the ScanSnap to the hub pluged into
the computer (first stage). If you connect it to a USB hub connected to another USB hub
(second stage), the ScanSnap may not function correctly.
• If you connect the ScanSnap with USB 2.0, it is required that the USB port and the Hub
be compliant with USB 2.0. The scanning speed may slow down when you connect the
ScanSnap with USB 1.1. If your computer has the USB 2.0 compatible port, use it.
1. Remove the seal on the back side of the ScanSnap.
2. Connect the USB cable to the USB connector on the ScanSnap, and the other end of the
USB cable into the USB port on your computer.
Insert the USB cable into the connector all the way to the end.
3. The connection of the USB cable is complete.
Then, follow the procedure described in "Turning the ScanSnap ON" (page 18).
17
USB connector
USB cable
DC 16V
Seal