Brother DCP-9040CN 빠른 설정 매뉴얼 - 페이지 8
{카테고리_이름} Brother DCP-9040CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-9040CN 31 페이지. Facsimile equipment
Brother DCP-9040CN에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 설정 매뉴얼 (30 페이지), 매뉴얼 (7 페이지), 부품 참조 목록 (43 페이지), 청소 및 관리 (7 페이지), 빠른 시작 매뉴얼 (10 페이지), 빠른 설정 매뉴얼 (20 페이지)
페이지 인쇄
STEP 1
Setting Up the Machine
2
Installing the toner
cartridges
1
Unpack the toner cartridges and gently shake
each toner cartridge from side to side 5 to 6
times.
2
Pull off the protective cover.
3
Hold the handle of the toner cartridge and slide
it into the drum unit. Make sure that you match
the toner cartridge colour to the same colour
label on the drum unit, and make sure that you
fold down the toner cartridge handle (1) once
the toner cartridge is in place.
(1)
1
2
3
4
1 C — Cyan
2 M — Magenta
3 Y — Yellow
4 K — Black
6
4
5
6
3
Improper Setup
(1)
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
1
Repeat steps 1 through 3 for the remaining
toner cartridges.
Put the drum unit back into the machine.
Close the front cover of the machine.
Load paper in the paper tray
Pull the paper tray completely out of the
machine.