Fujitsu SCANPARTNER 600C 설치 절차

{카테고리_이름} Fujitsu SCANPARTNER 600C에 대한 설치 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SCANPARTNER 600C 5 페이지. Image scanner
Fujitsu SCANPARTNER 600C에 대해서도 마찬가지입니다: 사용자 설명서 (25 페이지), 소모품 교체 및 청소 지침 (7 페이지), 사용자 설명서 (23 페이지)

페이지 인쇄
Fujitsu SCANPARTNER 600C 설치 절차
ScanPartner15C\600C\620C\93GX\3091DC\3092DC
Step A: Removing the shipping bracket.
It is recommended that before you connect the scanner to your computer that you inspect the
scanner and remove the shipping bracket first. The SP3091\3092DC's do not have shipping
locks.
Removing the shipping bracket: Your ScanPartner comes with a factory installed
shipping bracket designed to protect the scanner during shipment. Before the scanner
can be used, the shipping bracket must be removed. Follow these instructions to remove
the shipping bracket:
1. Tilt the scanner on its side as shown in figure 2-1
2. Unscrew the retainer screw and remove the shipping bracket.
3. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure 2-2)
4. Place scanner back in its normal position
Win95\98\ME Installation Procedure
Rev050404A