Fujitsu ScanPartner FI-4110CU 운영자 매뉴얼 - 페이지 17
{카테고리_이름} Fujitsu ScanPartner FI-4110CU에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanPartner FI-4110CU 40 페이지. Image scanner
Fujitsu ScanPartner FI-4110CU에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)
페이지 인쇄
2.3.4 Connecting to the Computer
This section explains how to connect the scanner to the computer.
Connect the scanner as follows:
1) Connect the type B connector of the interface cable (accessory of this scanner) to
the scanner until it clicks.
2) Connect the type A connector (opposite) of the interface cable to the USB port of
the computer or a USB hub.
u Note
- Be sure to use the USB cable which comes as an accessory with this scanner.
- When connecting to a USB hub, use the first stage USB hub that is closest to
2.3.5 Installing the Device Driver and Software
Install the device driver and the software from the setup CD-ROM supplied with
the image scanner. For detailed installation, read each Operator's Guide contained
in the CD-ROM
fi-4110CU Image Scanner Operator's Guide
A
タイプAコネクタ
A
Type A connector
(Note that we does not certify the correct operation of a commercial USB
cable.)
the computer. If you use the second or later, the scanner may not operate
correctly.
インタフェースコネクタ
Interface connector
B
B
タイプBコネクタ
Type B connector
2-5