Fujitsu ScanPartner FI-4110CU 운영자 매뉴얼 - 페이지 23

{카테고리_이름} Fujitsu ScanPartner FI-4110CU에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanPartner FI-4110CU 40 페이지. Image scanner
Fujitsu ScanPartner FI-4110CU에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)

페이지 인쇄

3.2.2 Setting Documents

This section explains how to set documents.

Loosening documents

Before setting documents, sufficiently loosen them by the following procedure:

Remove a 4 mm thick section of pages, hold the ends of the documents with both

hands, and bend the documents.

Hold the documents strongly with both hands so that both ends of the documents

are slanted, and then unbend the documents so that they are inflated.

Repeat the operations described above two or three times.

Turn the document by 90

u Key point

The thickness of the documents to be set shall be 4 mm or less.

Failure to do so could result in the paper jam or the reading defect.

Leveling both ends and setting the documents

Level both ends of the documents so that they can be read correctly.

u Key point

Set the documents as follows:

For single-side reading: Place the reading side facing the document support

surface.

For double-sided reading: Place the surface (first page) facing the document

support surface.

3-4

and similarly loosen it.

fi-4110CU Image Scanner Operator's Guide