Brother DCP-9045CDN 매뉴얼 - 페이지 6
{카테고리_이름} Brother DCP-9045CDN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-9045CDN 7 페이지. Scan to ftp (file transfer protocol)
Brother DCP-9045CDN에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 설정 매뉴얼 (32 페이지), 청소 및 관리 (7 페이지), 서비스 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (10 페이지)
페이지 인쇄
5.2: How to scan using FTP Profiles
1.
Put the document face up in the ADF, or face down on the scanner glass.
2.
Press
3.
Press
4.
Press
5.
Choose one of the options below:
i. Press
ii. Press
6.
Press
7.
Press
8.
Use the dial pad to enter the username. Press OK.
9.
Use the dial pad to enter the password. Press OK.
10. Do one of the following:
11. Press
Colour Start and go to Step 13.
Note
If you want to change the file name manually, go to step 12
12. Press
Enter the file name you want to use (up to 15 characters) and press OK.
Press Mono Start or Colour Start.
13. The LCD shows Connecting. When the connection to the FTP server is successful the
machine starts the scanning process.
Scan to FTP
(Scan).
or
to choose Scan to FTP. Press OK.
or
to choose one of the FTP server profiles listed. Press OK.
If the Scan to FTP profile is complete, you will automatically go to Step 9.
If the Scan to FTP profile is not complete, for instance, the login account name
and password are missing or the quality or file type are not chosen, you will be
prompted to enter any missing information in the following steps.
or
to choose Colour 150 dpi, Colour 300 dpi or Colour 600 dpi.
Press OK and go to Step 6.
or
to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go
to Step 7.
or
to choose PDF or JPEG. Press OK.
or
to choose PDF or TIFF. Press OK.
I. If you want to start scanning, press Mono Start or Colour Start and go to Step
13.
II. If you want to change the file name, go to Step 11.
or
to choose a file name you want to use and press OK. Press Mono Start or
or
to choose <Manual>. Press OK.
-6-