Fujitsu ScanSnap iScanner fi-6010N 시작하기 매뉴얼 - 페이지 26
{카테고리_이름} Fujitsu ScanSnap iScanner fi-6010N에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap iScanner fi-6010N 45 페이지. Network adf scanner
Fujitsu ScanSnap iScanner fi-6010N에 대해서도 마찬가지입니다: 사양 (2 페이지), 시작하기 매뉴얼 (21 페이지), 브로셔 및 사양 (2 페이지), 시작하기 매뉴얼 (21 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
Chapter 5
In addition to this "Getting Started" guide, a "Operator's
Guide" is also available.
The "Operator's Guide" contains information about
scanner settings, scanner administration, and scanner
operations.
Consult this manual when using the scanner.
The "Operator's Guide" is a PDF file, and can be viewed
with Adobe Reader (*).
* Adobe Reader can be downloaded from the following
site.
http://www.adobe.com/
Login as the administrator via the network interface to
download the "Operator's Guide".
The download procedure is as follows:
1. From the [Start] menu, point to [All Programs] -
[fi-scanner V2], and then click [fi Network
Scanner Admin Tool].
The Admin Tool is started.
2. Specify the "Connect to" (of the scanner).
Enter the IP address, scanner name, or FQDN
name for the scanner to be setup or managed.
If the port number was changed in
ATTENTION
"3.6 Setting the Admin Network"
(page 9) enter the changed port
number for "Port Number".
When trying to connect with a port
number other than the specified
number, it will take up to 20 sec-
onds before a connection error
occurs.
To use SSL, select the [Use
HTTPS] checkbox.
If the Admin Tool is started while
there is insufficient free memory, a
script error may occur. Try again
after ensuring that there is enough
free memory.
Downloading the Manual
3. Press the [Connect] button.
The "Login" screen appears.
4. Press the [Download Manual] button.
The "File Download" dialog box appears.
5. Press the [Save] button.
The "Save As" dialog box appears.
When the [Download Manual] button
ATTENTION
is pressed, if Adobe Reader has not
been installed, and the [Open] button
on the "File Download" dialog box is
pressed, a "Connection error" will
occur.
6. Select a folder and enter a file name.
7. Press the [Save] button.
The file is saved.
Next, perform a scan test.
15