Fujitsu ScanSnap S1300 시작하기 매뉴얼 - 페이지 6

{카테고리_이름} Fujitsu ScanSnap S1300에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap S1300 8 페이지. Color image scanner
Fujitsu ScanSnap S1300에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 시작하기 매뉴얼 (9 페이지), 사양 (3 페이지), 안전 주의사항 (9 페이지)

페이지 인쇄

Connect cables to the ScanSnap.

Use only the cables supplied with the

ScanSnap.

To power on the ScanSnap, the USB

cable and either of the power cables

(power cable or USB bus power cable)

are need to be connected.

When connecting to a USB hub, be sure

to connect the ScanSnap to the hub

nearest to your computer (first stage). If

the ScanSnap is connected to a USB hub

from the second stage onwards, it may

not operate correctly.

If connecting the ScanSnap with USB 2.0,

make sure that the USB port and the USB

hub are compliant with USB 2.0. The

scanning speed slows down if the

ScanSnap is connected with USB 1.1. If

your computer has the USB 2.0

compatible port, use it.

Using the Power Cable

1. Connect the power cable

connector of the ScanSnap and plug in the

AC outlet.

2. Connect the USB cable

nector on the ScanSnap and the USB port on

your computer.

Using the USB Bus Power Cable

1. Connect the USB bus power cable

power connector on the ScanSnap and the

USB port on your computer.

2. Connect the USB cable

nector on the ScanSnap and the USB port on

your computer.

to the power

to the USB con-

to the

to the USB con-

Open the ADF paper chute (cover) of the

ScanSnap.

ADF Paper Chute

(Cover)

The [Scan] button lights in blue, indicating

that the ScanSnap is turned on.

The ScanSnap should be automatically

detected by your computer.

The bottom part of the ScanSnap may

become hot when the ScanSnap is used

but this does not affect ScanSnap

operation or cause any physical harm.

Be careful not to drop the ScanSnap

when carrying it.

[Scan] Button