Brother HL-2460N 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Brother HL-2460N에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-2460N 2 페이지. Network quick setup guide - english
Brother HL-2460N에 대해서도 마찬가지입니다: 빠른 네트워크 설정 매뉴얼 (2 페이지), 서비스 매뉴얼 (14 페이지)

페이지 인쇄

Step 5 Print a test page.

ON OFF

Make sure that the printer power switch is off.

Plug the AC power cord into an AC

Connect the AC power cord to the printer.

outlet.

Do NOT connect the interface cable.

Turn the power switch on.

Parallel

For

interface cable users (For

Step 6 Connect the printer to your PC & Install the printer driver.

Click "Connect the interface cable and

Select the parallel interface

install the printer driver / utilities."

cable.

USB

For

interface cable users (For

Step 6 Install the driver & Connect the printer to your PC.

Note: When "Add New Hardware Wizard"

Click "Connect the interface cable

appears on your PC, click the Cancel

and install the printer driver /

button.

utilities."

Note: Install the driver before you connect

the USB interface cable to the printer. If you

have already connected it, remove it.

Click the OK button.

Make sure the printer power switch is on.

Step 7

Set up your PC printer port.

(For Windows

2000 users only)

After your PC has restarted, click Start,

Select the Brother HL-2460 series

Setting and Printers.

(copy2) icon.

Unfold the tray

extension flap

REDAY

Data

Back

Reprint

Set

Job cancel

ON OFF

After the printer has finished warming up, the

READY message appears.

Windows

users only)

ON OFF

Turn the printer power switch off.

Connect the interface cable to your PC, and

then connect it to the printer.

Windows

users only)

Select the USB cable.

Click the Next button.

Follow the on-screen

instructions.

ON OFF

Connect the USB interface cable to your PC, and then connect

it to the printer.

For Windows

98/Me users: The setup is now complete.

For Windows

2000 users: Go to Step 7.

Click the File menu, and then select Set as Default printer.

The setup is now complete.

PRINTING

Data

Back

Note: When you are ready to set

Reprint

Set

the Control Panel message

Job cancel

language, refer to the Control

Panel section at the bottom of

this sheet.

Press the Go switch. The printer prints a test page.

Check that the test page has printed correctly.

ON OFF

Turn the printer power

switch on.

Macintosh

For

If you print from a Macintosh computer, you will have to connect it to the printer via a Network

(Brother recommends using the NC-4100h network board).

Network

For

users

If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide.

After the administrator has made the required settings, install the driver referring to the "Installing the

Driver for Network users" section of the Quick Network Setup Guide.

Control Panel

Data

Back

Reprint

Set

Job cancel

For more information, see "CONTROL

PANEL" in Chapter 3 of the User's Guide on

the supplied CD-ROM.

Follow the instructions for your interface cable

and operating system.

Note: If "Add New Hardware Wizard"

Click the Next button.

appears, click the Cancel button.

users

Data LED : Orange

Data remains in the printer buffer.

Blinking

Receiving or processing data.

Off

No remaining data.

Switches

Exit from the control panel menu, reprint settings and clear error messages.

Pause / Continue printing.

Job Cancel

Stop and cancel the printer operation in progress.

Reprint

Select the reprint menu.

Move forward and backward through menus.

Set

Select the control panel menu.

Set the selected menus and the settings.

Back

Go back one level in the menu structure.

Language Setting (Default is English)

1. Select the SETUP mode by pressing the

switch, and then press the Set switch.

2. Check that the LANGUAGE message appears, and then press the Set switch.

3. Choose your language by pressing the

switch, and then press the Set switch. An asterisk mark (

the end of the display.

(You can return to the READY status by pressing the Go switch.)

Note

1. A real time clock is built into this printer. Set the time referring to Chapter 3 of the User's Guide on the CD-ROM.

You need to set the time before you can use the log management and reprint functions.

2. Please enhance the RAMDISK size when you want to use the reprint functions without the optional HDD or

CompactFlash.

See RAM expansion in Chapter 4 of the User's Guide.

Click the Finish button.

The setup is now complete.

) appears at