Fujitsu ScanSnap S300 시작하기 매뉴얼 - 페이지 26
{카테고리_이름} Fujitsu ScanSnap S300에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanSnap S300 37 페이지. Color image scanner
Fujitsu ScanSnap S300에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
3.4 Scanning Business Cards
1.
From the [Start] menu, select [All Programs]
[CardMinder V3.2].
After CardMinder is started, make sure that CardMinder is active (its window
is brought to the front).
ATTENTION
2.
Load the business cards onto the scanner. Adjust the side guides to the
business card width.
ATTENTION
3.
Press the [SCAN] button.
Scanning is started.
⇒
The [CardMinder] window appears and displays the recognized character data,
⇒
name, company, and e-mail address.
4.
The following window appears.
Select a business card from the Data list. Check the data in the Recognition
result field of this window.
Correct the data if there is any recognition mistake.
25
You cannot scan business cards in the Quick Menu mode.
Set the card with its face up and its bottom margin towards the
scanning direction when you configure the settings as follows:
In the [ScanSnap Manager - Scan and Save Setting] dialog box,
select the [Scanning] tab
face up].
[CardMinder V3.2]
Business card
Set it face down
Side guide
[SCAN] button
[Option]
[Set the document with its