Fujitsu 200 사양 시트

{카테고리_이름} Fujitsu 200에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu 200 2 페이지. Harsh environment case for pencentra 130
Fujitsu 200에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사용자 설명서 (8 페이지), 사용자 설명서 (2 페이지), 사용자 지침 (1 페이지), 사용자 지침 (1 페이지), 사용자 지침 (2 페이지)

페이지 인쇄

SPF200-USB Fingerprint Sensor

(Front view)

Features

• All-in-one Fingerprint module with USB connector.

• Easy to integrate with other devices

• Uses Fujitsu MBF200 Fingerprint Sensor

• Low Power

– 18 milliamps: Operating

– 500 microamps: Standby

• USB 1.1 compatible (to 13 FPS)

• 256 x 300 Pixel Array (50 µm pixel pitch)

Description

The Fujitsu SPF200-USB is an all-in-one USB device. Simply

connect it to your USB cable and you have a working fingerprint

sensor! The SPF200-USB is ideal for integrating into devices

where USB is the communication interface such as computer

peripherals and embedded applications. Mount the SPF200-

USB into your device and you have a completed product

without going through the expense of board layout and debug.

• 500 DPI resolution

• 8-bit grayscale (256 gray levels)

• On board A/D Converter

• Programmable gain control for image optimization

• 12.8mm x 15mm image area

• Lead-Free and ROHS compliant parts available

• Windows XP USB signed drivers

Users will no longer be required to remember and enter

cumbersome passwords or PIN codes. Fingerprint authentication

provides a reliable, quick and user friendly alternative to

passwords. The SPF200-USB fingerprint sensor has the USB 1.1

controller logic built right into the sensor, no external hardware is

required. Merely plug the sensor into the USB cable, the power

and data communications is managed by the USB protocol.

(Back view)