Fujitsu ETERNUS 연결 매뉴얼 - 페이지 14

{카테고리_이름} Fujitsu ETERNUS에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS 19 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지)

페이지 인쇄

Chapter 3 Setting Up the Server

3.3 Setting the Configuration File (/etc/system)

To set multiple ports, repeat the above procedure for each port.

3.3

Setting the Configuration File (/etc/system)

Procedure

P3AM-4562-01ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

•

Frame data size confirmation

# bcu port --dfsize 1/0

Port maximum receive data field size is 2048 -

Edit the configuration file.

Edit the configuration file (/etc/system) and specify the command queue depth.

The appropriate "ssd_max_throttle" parameter value is determined by the ETERNUS Disk

storage system model, as follows:

ETERNUS Disk storage system

ETERNUS2000

ETERNUS4000

ETERNUS8000

Specify the command queue depth for the "ssd_max_throttle" parameter.

Add the "ssd_max_throttle" parameter if it does not exist.

Example

set ssd:ssd_max_throttle = 20

After editing the configuration file, save it.

After the setting is complete, check the configuration file for incorrect settings.

Reboot the server.

# /usr/sbin/shutdown -y -g0 -i6

Command queue depth setting

End of procedure