Fujitsu eternus af 구성 매뉴얼 - 페이지 13

{카테고리_이름} Fujitsu eternus af에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu eternus af 28 페이지. Fibre channel for citrix xenserver
Fujitsu eternus af에 대해서도 마찬가지입니다: 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (43 페이지)

페이지 인쇄

Chapter 4

Checking the Server Information

The server information registered in the ETERNUS DX/AF should be checked.

A variety of commands are used to check the following server information.

iSCSI Software Initiator

•

Since iSCSI Software Initiator is provided with the OS, installation is not required.

Check the SUNWiscsiu and SUNWiscsir packages using the "pkginfo" command.

iSCSI Initiator name

•

The iSCSI Initiator name is required for the ETERNUS DX/AF settings.

Execute the following command to check the iSCSI Initiator name:

# iscsiadm list initiator-node

Initiator node name: iqn.1986-03.com.sun:01:0003bace9997.48a386c4

Initiator node alias: -

Header Digest: NONE/-

Data Digest: NONE/-

Authentication Type: NONE

RADIUS Server: NONE

Configured Sessions: 1

The iSCSI Initiator name is displayed in the "Initiator node name" column.

Server-side LAN card IP address for connecting to the ETERNUS DX/AF

•

Execute the following command:

# ifconfig -a

Set this IP address if it is not already set.

•

Initiator CHAP Name

The Initiator CHAP Name is the user name for unidirectional CHAP authentication. Execute the following

command:

This is not required if CHAP authentication is not used.

# iscsiadm list initiator-node

The Initiator CHAP Name is displayed in the "CHAP Name" column of the applicable target information.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris

P3AM-4042-18ENZ0