Fujitsu eternus af 구성 매뉴얼 - 페이지 16

{카테고리_이름} Fujitsu eternus af에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu eternus af 28 페이지. Fibre channel for citrix xenserver
Fujitsu eternus af에 대해서도 마찬가지입니다: 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (43 페이지)

페이지 인쇄

Chapter 7

Installing the iSCSI Software Initiator and Setting

Up the Server

7.1

Installing the iSCSI Software Initiator

Since iSCSI Software Initiator is provided with the OS, installation is not required.

7.2

Setting Up the Server

iSCSI connection settings depend on the CHAP authentication method. Perform the settings to match the

CHAP authentication to be used.

CHAP authentication method

None

Unidirectional CHAP authentication

Bidirectional CHAP authentication

7.2.1

Setting Up the Command Queue Depth

Set the number of commands allowed to be queued (command queue depth) on each LUN in the ETERNUS

DX/AF storage systems from the LAN card. This setting optimizes the connection between the ETERNUS DX/AF

storage systems and the server.

Edit the configuration file.

Edit the configuration file (/etc/system) and specify the command queue depth.

Model

ETERNUS DX/AF

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris

Required settings

"7.2.1 Setting Up the Command Queue Depth" (page 16)

"7.2.2 iSCSI Basic Settings" (page 18)

"7.2.1 Setting Up the Command Queue Depth" (page 16)

"7.2.2 iSCSI Basic Settings" (page 18)

"7.2.3 Server Settings when CHAP Authentication is Used" (page 19)

"7.2.1 Setting Up the Command Queue Depth" (page 16)

"7.2.2 iSCSI Basic Settings" (page 18)

"7.2.3 Server Settings when CHAP Authentication is Used" (page 19)

"7.2.4 Server Settings when Bidirectional CHAP Authentication is Used" (page 21)

Setting value

Command queue depth

Arbitrary (*1)

(Up to 1024 for each iSCSI port of the ETERNUS DX/AF)

P3AM-4042-18ENZ0