Fujitsu ETERNUS DX Disk 사용자 설명서 - 페이지 32

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 35 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (29 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

페이지 인쇄

1. Hardware

App.A

Restoration Procedure for when a Path Degrades in a VERITAS Volume Manager Environment

Example (for ETERNUS DX410)

# vxdmpadm getsubpaths ctlr=c6

NAME

=========================================================================

sdb

sdc

sdd

# vxdmpadm getsubpaths ctlr=c7

NAME

=========================================================================

sde

sdf

sdg

In this example, "DISABLED" is displayed for the "sde" volume.

The controller number of the Fibre Channel card in which the volume cannot be recognized is "c7".

Obtain and apply the Change LUN State Utility.

(1)

Obtain the Change LUN State Utility provided by each Fibre Channel card vendor.

For QLogic Fibre Channel cards

•

Obtain the Change LUN State Utility from the QLogic web-site (http://www.qlogic.com/).

For Emulex Fibre Channel cards

•

Obtain the Change LUN State Utility from the Emulex web-site (http://www.emulex.com/).

Refer to each vendor web-site for details about the Change LUN State Utility.

(2)

Apply the Change LUN State Utility that is obtained in

fied by each vendor to change the state of the LUN to recognized.

Refer to each vendor web-site for details about how to apply the Change LUN State Utility.

Enable VERITAS Volume Manager.

Enable VERITAS Volume Manager using the "vxdctl" command.

# vxdctl enable

Check the volume status.

Check that the status of a volume that was "DISABLED" in

# vxdmpadm getsubpaths ctlr=c

The underlined portion indicates the controller number.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux

STATE

PATH-TYPE

ENABLED

STATE

PATH-TYPE

DISABLED

ENABLED

DMPNODENAME

ENCLR-TYPE

sdb

FJ_DX400

sdc

FJ_DX400

sdd

FJ_DX400

DMPNODENAME

ENCLR-TYPE

sdb

FJ_DX400

sdc

FJ_DX400

sdd

FJ_DX400

Step (1)

according to the procedure speci-

Step (2)

is changed to "ENABLED".

ENCLR-NAME

fj_dx400

ENCLR-NAME

fj_dx400

P3AM-3842-12ENZ0