Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 3

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 28 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (29 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (32 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

페이지 인쇄
Fujitsu ETERNUS DX Disk 구성 매뉴얼
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX/AF to a server running Solaris OS via an iSCSI interface.
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX/AF, server, OS, LAN cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX/AF.
The Contents and Structure of this Manual
This manual is composed of the following ten chapters.
"Chapter 1 Workflow" (page 6)
•
This chapter describes how to connect the ETERNUS DX/AF to a server.
"Chapter 2 Checking the Server Environment" (page 8)
•
This chapter describes which servers can be connected to ETERNUS DX/AF storage systems.
"Chapter 3 Notes" (page 9)
•
This chapter describes issues that should be noted when connecting the ETERNUS DX/AF storage systems
and server.
"Chapter 4 Checking the Server Information" (page 13)
•
This chapter describes how to check the server information registered in the ETERNUS DX/AF.
"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 14)
•
This chapter describes how to install ETERNUSmgr.
"Chapter 6 Setting Up the ETERNUS DX/AF" (page 15)
•
This chapter describes how to use ETERNUS Web GUI or ETERNUSmgr to set up the ETERNUS DX/AF storage
systems.
•
"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 16)
This chapter describes how to install the iSCSI Software Initiator and set up the server.
"Chapter 8 Checking Connections" (page 23)
•
This chapter describes how to check the connection status between the server and ETERNUS DX/AF.
"Chapter 9 Setting the Multipaths" (page 24)
•
This chapter describes what to be set in order to create multipath environment.
"Chapter 10 Setting a File System" (page 26)
•
This chapter describes how to create a file system.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
3
Copyright 2017 FUJITSU LIMITED
Preface
18th Edition
May 2017
P3AM-4042-18ENZ0