Fujitsu ETERNUS DX S3 Series 구성 매뉴얼 - 페이지 8

{카테고리_이름} Fujitsu ETERNUS DX S3 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX S3 Series 38 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX S3 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (16 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

1. Hardware

Chapter 1

Workflow

Setting Up the Fibre Channel Switches

If a Fibre Channel switch is to be used, set it up now.

"Chapter 7 Setting Up the Fibre Channel Switches" (page 19)

•

Checking the Fibre Channel switch connection requirements

•

"Server Support Matrix for FC-SWITCH"

Installing the Fibre Channel Card Drivers and Setting the Parameters

Install the Fibre Channel card drivers, and set up the server environment.

•

"8.1 Installing the Driver" (page 21)

"8.2 Setting Up the Driver Parameters" (page 21)

•

Checking the Fibre Channel card driver versions

•

"Server Support Matrix"

For the standard multipath driver or the ETERNUS

Installing the Multipath Driver

Install the ETERNUS Multipath Driver before using

it.

"8.3 Installing the Multipath Driver" (page 23)

•

Installing the Multipath Driver

•

Installation & Configuration Guide

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.

"9.2 Setting Up the Server to Recognize the Logical Units" (page 25)

•

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

Multipath Driver

For single-path connection or Veritas Volume

Manager

Installing the FJspio Package

Install the FJspio.

"8.4 Installing the FJspio Package" (page 23)

•

P3AM-3782-23ENZ0