Fujitsu ETERNUS DX200 S3 구성 매뉴얼 - 페이지 4
{카테고리_이름} Fujitsu ETERNUS DX200 S3에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX200 S3 28 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX200 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (13 페이지), 구성 매뉴얼 (18 페이지), 설정 매뉴얼 (15 페이지), 안전 주의사항 (12 페이지)
![Fujitsu ETERNUS DX200 S3 구성 매뉴얼](/uploads/products/server2/2443766/2443766.jpg)
Preface
The Contents and Structure of this Manual
This manual is composed of the following eight chapters.
"Chapter 1 Workflow" (page 7)
•
This chapter describes how to connect the ETERNUS DX to a server.
•
"Chapter 2 Checking the Server Environment" (page 8)
This chapter describes which servers can be connected to ETERNUS DX storage systems.
"Chapter 3 Notes" (page 9)
•
This chapter describes issues that should be noted when connecting the ETERNUS DX storage systems and
server.
"Chapter 4 Checking the Server Information" (page 13)
•
This chapter describes how to check the server information registered in the ETERNUS DX.
"Chapter 5 Setting Up the ETERNUS DX" (page 14)
•
This chapter describes how to use ETERNUS Web GUI or ETERNUSmgr to set up the ETERNUS DX storage
systems.
"Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)
•
This chapter describes how to install the iSCSI Software Initiator and set up the server.
"Chapter 7 Checking Connections" (page 22)
•
This chapter describes how to check the connection status between the server and ETERNUS DX.
"Chapter 8 Setting the Multipaths" (page 24)
•
This chapter describes the PV-Links settings.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX
4
Copyright 2014 FUJITSU LIMITED
P3AM-3402-14ENZ0