Brother HL-5470DWT 매뉴얼 - 페이지 17

{카테고리_이름} Brother HL-5470DWT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-5470DWT 30 페이지. Wi-fi direct guide - english
Brother HL-5470DWT에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (35 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (35 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄

Configuration methods

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), you can configure a Wi-Fi

Direct network by following these instructions.

Press Menu.

Press a or b to choose Network.

Press OK.

Press a or b to choose Wi-Fi Direct.

Press OK.

Press a or b to choose Group Owner and then press OK.

Press a or b to choose On and then press OK.

Press a or b to choose PIN Code.

Press OK.

When Wi-Fi Direct On? is displayed, press a or b to choose On and then press OK.

To cancel, press a or b to choose Off and then press OK.

When Other Network I/F will be disabled. Do you want to continue? is displayed,

press 1 to accept.

To cancel, press 2.

When Activate Wi-Fi Direct on other device. is displayed, activate your mobile device's

WPS PIN configuration method (see your mobile device's user's guide for instructions) and then press

OK on your machine. This will start the Wi-Fi Direct setup.

To cancel, press Clear.

The machine will wait for a connection request from your mobile device. When Input PIN Code

appears, input the PIN displayed on your mobile device to the machine.

Press OK.

If your mobile device connects successfully, the machine shows Connected.

You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device

or scanning to your mobile device, you can download the

Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center

(http://solutions.brother.com/).

If the connection failed, see Troubleshooting uu page 21.