Brother HL-5470DWT 매뉴얼 - 페이지 21

{카테고리_이름} Brother HL-5470DWT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-5470DWT 30 페이지. Wi-fi direct guide - english
Brother HL-5470DWT에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (35 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (35 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄
Brother HL-5470DWT 매뉴얼
Configuration methods

Configuration using the PIN Method of Wi-Fi Direct

If your mobile device supports the PIN Method of Wi-Fi Direct, you can configure a Wi-Fi Direct network by
following these instructions.
a
Press Menu.
b
Press a or b to choose Network.
c
Press a or b to choose Wi-Fi Direct.
d
Press a or b to choose PIN Code.
e
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
f
When Other Network I/F will be disabled.Do you want to continue? is displayed,
press OK to accept.
To cancel, press Cancel.
g
Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device.Then Press OK. is displayed. Press OK on your
machine. This will start the Wi-Fi Direct setup.
To cancel, press Stop/Exit.
h
Do one of the following:
When your Brother machine is the G/O (Group Owner), the machine will wait for a connection request
from your mobile device. When PIN Code appears, input the PIN displayed on your mobile device
to the machine. Press OK. Follow the instructions and go to step j.
If the PIN is displayed on your Brother machine, input the PIN to your mobile device.
When your Brother machine is not the G/O (Group Owner), the machine will display available device
names to configure a Wi-Fi Direct network with. Choose a mobile device you want to connect to and
press OK. You can re-search for available devices by pressing Rescan. Go to step i.
i
Do one of the following:
Press Display PIN Code to display the PIN on your machine and input the PIN to your mobile
device. Follow the instructions and then go to step j.
Press Input PIN Code to input a PIN shown by your mobile device to the machine and then press
OK. Follow the instructions and then go to step j.
If your mobile device does not display a PIN, press
and try again.
j
If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device
or scanning to your mobile device, you can download the
Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the Brother Solutions Center
(http://solutions.brother.com/).
If the connection failed, see Troubleshooting uu page 21.
on your Brother machine. Go back to step d
2
2
18