Fujitsu Eternus DX200F 설정 매뉴얼 - 페이지 7

{카테고리_이름} Fujitsu Eternus DX200F에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Eternus DX200F 10 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu Eternus DX200F에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (13 페이지), 구성 매뉴얼 (16 페이지), 구성 매뉴얼 (38 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

Host Affinity Settings

The host affinity settings ensure security when multiple servers are connected by assigning the host interface ports

that the hosts (servers) can access and the volumes that the hosts (servers) can recognize.

Follow the procedure below to set host affinity by associating a host group, a CA port group and a LUN group.

Host group addition

Add the information on the hosts (servers) that access

the ETERNUS DX.

To display the screen to add the host groups (example

for iSCSI host groups):

Click [Add iSCSI Host Group] in [Action] under

[Host Group] in [Category] on the [Connectivity] tab.

Port parameter settings

Set the connection information between the host

interface port and the server.

To display the screen to set the port parameters

(example for iSCSI Port):

Click [iSCSI] under [Port Group] in [Category] on the

[Connectivity] tab.

Select the checkbox for the iSCSI

port to set the port parameters for on the

[iSCSI Port Group] screen and then click

[Modify iSCSI Port Parameters] in [Action].

Port group creation

Create a port group for a host to access the ETERNUS

DX.

To display the screen to create a port group (example

for iSCSI Port):

Click [Create iSCSI Port Group] in [Action] under

[Port Group] in [Category] on the [Connectivity] tab.

LUN group addition

Add a group of volumes that can be recognized by the

host (LUN group).

To display the screen to add a LUN group:

Click [Add LUN Group] in [Action] under [LUN Group]

in [Category] on the [Connectivity] tab.

FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide

P3AM-8482-01ENZ0