Brother HL-6180DWT 빠른 설정 매뉴얼 - 페이지 15

{카테고리_이름} Brother HL-6180DWT에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother HL-6180DWT 35 페이지. Wi-fi direct guide - english
Brother HL-6180DWT에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 빠른 설정 매뉴얼 (35 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄

Wired Network

For Wired Network Interface Cable Users for Macintosh

Before you install

Make sure your machine is connected to the

power and your Macintosh is ON. You must be

logged on with Administrator rights.

Important

For users of Mac OS X 10.5.7 or lower, upgrade

to Mac OS X 10.5.8 - 10.7.x. (For the latest

drivers and information for the Mac OS X you are

using, visit http://solutions.brother.com/.)

Note

If you want to add the PS driver (BR-Script3

printer driver), please go to the Brother Solutions

Center at http://solutions.brother.com/ and visit

FAQ's on your model page for instructions.

Remove the protective cap from the Ethernet

port marked with a

Connect the network interface cable to the

Ethernet port, and then connect it to a free port

on your hub.

Make sure your machine's power switch is on.

symbol.

Install the printer driver

Put the installer CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon. If

prompted, select your model.

Choose Wired Network Connection

(Ethernet) and then click Next. Follow the

on-screen instructions.

Note

It may take a few minutes for the installation to

complete.

Choose your machine from the list, and then

click OK.

Note

• If there is more than one of the same model

connected on your network, the MAC Address

(Ethernet Address) will be displayed after the

model name.

• You can find your machine's MAC Address

(Ethernet Address) and IP Address by printing

out the Printer Settings Page. See Print the

Printer Settings Page on page 31.

Macintosh