Fujitsu ETERNUS DX60 S3 구성 매뉴얼 - 페이지 10

{카테고리_이름} Fujitsu ETERNUS DX60 S3에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX60 S3 28 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX60 S3에 대해서도 마찬가지입니다: 수동 서버 연결 구성 (12 페이지), 구성 매뉴얼 (13 페이지), 사이트 계획 매뉴얼 (41 페이지), 안전 주의사항 (12 페이지)

페이지 인쇄

1. Hardware

Chapter 3

Notes

3.3

LAN Environment Notes

Example of a LAN switch connection configuration

Business server A

Card#2

A separate LAN segment is used for each

Server/Storage grouping (*2).

Here, LAN ports 1, 2 and 10 comprise VLAN1,

while LAN ports 3 and 11 comprise VLAN2.

*1: In this system configuration, multipaths provide redundant connections between the servers and stor-

age system. LAN switches #1 and #2 provide physical separation of the network paths.

*2: A separate LAN segment is provided in the LAN switch (using the switch VLAN function) for each group-

ing of business servers and storage systems (equivalent to the FC zones).

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

LAN switch

[Business LAN]

LAN

Card#1

Business server B

LAN

Card#3

Card#2

LAN switch #1

LAN switches should not

[iSCSI LAN]

be inter-connected (*1)

LUN1

LUN2

LUN3

ETERNUS DX

LAN

Card#1

Business server C

LAN

Card#3

Card#2

Card#3

LAN switch #2

[iSCSI LAN]

Management

LAN switch

LAN port

[Management LAN]

The iSCSI LAN and management LAN

segments are kept separate in the iSCSI

LAN switches, helping maintain the security

of each.

Business LAN

Similarly to FC-SAN,

a dedicated LAN is used for iSCSI,

not the business LAN.

iSCSI LAN

Management LAN

P3AM-3402-14ENZ0