Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX Disk storage system to a server running Linux.
Procedure varies according to whether a single-path or multipath configuration is used.
When a Fibre Channel switch is used to make the connection, refer to the "ETERNUS DX Disk storage sys-
tems User's Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings" and use the proce-
dure described.
The workflow is shown below.
Usable Multipath Drivers
•
ETERNUS Multipath Driver
VERITAS Volume Manager
•
device-mapper multipath
•
Required Documents
•
Server Support Matrix
Server Support Matrix for FC-SWITCH
•
ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) Disk Storage System
•
Settings (ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700 S2)
ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk Storage Sys-
•
tem Settings for ETERNUS DX60/DX60 S2, DX80, DX90
ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk Storage Sys-
•
tem Settings for ETERNUS DX400/DX8000 series
ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) Fibre Channel Switch
•
Settings
ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux Driver Set-
•
tings for Non-Fujitsu Fibre Channel Cards
ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel/FCoE/iSCSI/SAS) for Linux
•
device-mapper multipath
Web GUI User's Guide
•
•
ETERNUSmgr Install Guide
ETERNUSmgr User Guide
•
Other manuals provided with each product (server, Fibre Channel Cards, Fibre Channel Card Driver, Multi-
•
path Driver, and VxVM)
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
11
Copyright 2013 FUJITSU LIMITED
P3AM-3842-12ENZ0
페이지 인쇄