Fujitsu ETERNUS DX8100 S2 구성 매뉴얼 - 페이지 10

{카테고리_이름} Fujitsu ETERNUS DX8100 S2에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX8100 S2 15 페이지. Disk storage system settings
Fujitsu ETERNUS DX8100 S2에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지)

페이지 인쇄

Chapter 2

Setting Up the ETERNUS DX

2.1

Common Settings

2.1.2

Creating the Server Accessible LUN Groups (Setting the LUN Groups)

Create LUN groups for the server to access. Refer to "Connectivity Management" in "ETERNUS Web GUI User's

Guide" for details, and set the LUN groups.

Depending on the OS version, the server may not recognize the ETERNUS DX unless a LUN group is as-

signed from LUN0. In this case, assign a LUN group starting from LUN0 in ascending order.

2.1.3

Setting the Host Responses

The host response parameters for the ETERNUS DX must be set to match the way the server processes the

responses to requests from the ETERNUS DX. Setting of the host response must be done before connecting

the ETERNUS DX to the server.

Set the parameters that are described below for each OS.

Retain the default values for all of the parameters that are not described below.

When setting the access path using the ETERNUS SF Storage Cruiser, the host responses for FC host will

•

be set to default values. Set the host response after setting the access path using the ETERNUS SF Stor-

age Cruiser.

•

Since "Windows EMPD", "Linux EMPD", "Solaris EMPD", or "Others" cannot be selected after applying the

latest firmware, select "Default" for the Host Response setting.

Note that these items are displayed as the existing setting, but do not need to be changed.

Table 2.5 Host response settings

Solaris (*1)

Windows

Linux

VMware ESX

PAN Manager

Citrix XenServer

Oracle VM Server for

x86

HP-UX

Conditions

When all of the following con-

ditions are met

•

The OS standard Multipath

Driver (MPxIO) is used

The Multipath Diagnostic

•

Program (or Enhanced Sup-

port Facility 5.1 or later) is

installed

When an MPxIO that is differ-

ent from the above is used

When the ETERNUS Multipath

Driver or the Symantec Stor-

age Foundation is used

–

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

Host response selec-

Parameter

tion

None

Reservation Conflict Re-

sponse for Test Unit

(Create a new host re-

Ready

sponse)

Sense Data Conversion

Solaris MPxIO

–

Default

–

Default

–

HP-UX

–

Setting value

Conflict

4/*/* g 6/*/*

B/*/* g 6/*/*

–

P3AM-5332-15ENZ0