Fujitsu Eternus DX90 S2 구성 매뉴얼 - 페이지 7

{카테고리_이름} Fujitsu Eternus DX90 S2에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Eternus DX90 S2 38 페이지. Server connection. (fibre channel) for aix
Fujitsu Eternus DX90 S2에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 매뉴얼 (18 페이지), 설치 설정 (20 페이지), 수동 서버 연결 구성 (13 페이지), 하드웨어 설치 (23 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (15 페이지)

페이지 인쇄
Fujitsu Eternus DX90 S2 구성 매뉴얼
Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX/AF to a server running AIX. The workflow is shown
below.
Required Documents
"Server Support Matrix"
•
•
"Server Support Matrix for FC-SWITCH"
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX/AF
•
to be connected
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•
"ETERNUS Web GUI User's Guide"
•
"ETERNUSmgr Install Guide"
•
"ETERNUSmgr User Guide"
•
•
Manuals supplied with the server, Fibre Channel card, Fibre Channel card driver, and multipath driver
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX/AF
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF. Also, check the WWN of the
Fibre Channel card for the server that is required to set the ETERNUS DX/AF.
"Chapter 4 Checking the Server Information" (page 16)
•
"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 17)
•
"Chapter 6 Setting Up the ETERNUS DX/AF" (page 18)
•
Checking the setup and maintenance operations
•
-
"ETERNUS Web GUI User's Guide"
Installing ETERNUSmgr
•
"ETERNUSmgr Install Guide"
-
•
Checking the ETERNUSmgr operational procedures
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS DX/AF
•
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
-
NUS DX/AF to be connected
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
7
Copyright 2018 FUJITSU LIMITED
P3AM-3782-23ENZ0