Fujitsu ETERNUS2000 model 100 서버 연결 매뉴얼 - 페이지 13

{카테고리_이름} Fujitsu ETERNUS2000 model 100에 대한 서버 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS2000 model 100 32 페이지. Disk storage system
Fujitsu ETERNUS2000 model 100에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 서버 연결 매뉴얼 (25 페이지), 연결 매뉴얼 (19 페이지), 연결 매뉴얼 (31 페이지)

페이지 인쇄

1. Chapter 4 Installing and Setting up Eternusmgr

Chapter 3 Notes

3.3 Connection Notes for PRIMEQUEST 500/400 Series and Other Companies'

Industry Standard Servers

•

All installed Fibre Channel cards must use the same connection method. FC-AL connection

and fabric connection cannot be mixed.

3.2.3

When Connecting PRIMEQUEST 1000 Series to an ETERNUS Disk

Storage System

When connecting the PRIMEQUEST 1000 series to an ETERNUS Disk storage system, the

following configurations are recommended:

•

For 1-port Fibre Channel cards used in system configurations that emphasize redundancy,

8Gbit/s 1-port Fibre Channel cards (MC-0JFC11) are recommended for use.

•

For 2-port Fibre Channel cards (MC-0JFC21), configurations in which both ports of any given

card connect to the same storage system are not recommended.

For other notes, contact a Fujitsu engineer.

3.3

Connection Notes for PRIMEQUEST 500/400 Series

and Other Companies' Industry Standard Servers

•

To build a cluster configuration for Windows®, use Microsoft Cluster Service (MSCS),

Windows Server Failover Cluster (WSFC), and MSCS- and WSFC-compatible applications.

This cluster configuration must also use only one type of Fibre Channel card. Operation

cannot be guaranteed if the cluster is configured using multiple types of Fibre Channel cards.

•

When the PRIMEQUEST 500/400 series is connected to an ETERNUS Disk storage system,

LUN recognition by the Windows® Plug and Play function is not guaranteed.

•

The following operation conditions are recommended to maintain storage system reliability:

•

When connecting the PRIMEQUEST 500/400 series to an ETERNUS Disk storage system,

the following configurations are recommended:

For other notes, contact a Fujitsu engineer.

P3AM-2922-05ENZ0

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®

Multiple paths

Use of drivers for ETERNUS Disk storage systems which support path redundancy control

Configure a multipath environment, and select a driver for ETERNUS Disk storage

systems which supports path redundancy control to increase redundancy and reliability of

the connection between the ETERNUS Disk storage systems and the server.

For 1-port Fibre Channel cards used in system configurations that emphasize redundancy,

8Gbit/s 1-port Fibre Channel cards (MC-08FC81) or 4Gbit/s 1-port Fibre Channel cards

(MC-08FC31/MC-08FC51) are recommended for use.

For 2-port Fibre Channel cards (MC-08FC41/MC-08FC61/MC-08FC91), configurations in

which both ports of any given card connect to the same storage system are not

recommended.