Fujitsu ETERNUS4000 400 매뉴얼 - 페이지 24

{카테고리_이름} Fujitsu ETERNUS4000 400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS4000 400 28 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS4000 400에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 9

9.1

Enabling MPxIO

Enable MPxIO.

Check the [mpxio-disable="no"] line in the "/kernel/drv/iscsi.conf" file.

Change the parameter to "no" when "yes" is set.

Example for changing the "/kernel/drv/iscsi.conf" file:

# To globally enable MPxIO on all iscsi ports set:

# mpxio-disable="no";

# To globally disable MPxIO on all iscsi ports set:

# mpxio-disable="yes";

mpxio-disable="no";

9.2

Reconfiguring and Restarting the Server

Reconfigure and restart the server to effect the new settings.

# touch /reconfigure

# /usr/sbin/shutdown -y -g0 -i6

Use the "format" command to check the MPxIO multipath status after multipathing is set up.

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Setting Up the Multipath Configuration

For the iSCSI LAN (used to transfer data), do not set multipath

configuration with IP Network Multipathing (IPMP).

When configuring the multipath, use MPxIO in the same way as FC-SAN is

used for configuration.

<- Check that no is set.