Fujitsu ETERNUS4000 500 서버 연결 매뉴얼 - 페이지 20
{카테고리_이름} Fujitsu ETERNUS4000 500에 대한 서버 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS4000 500 25 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS4000 500에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)
페이지 인쇄
Chapter 8 ETERNUS Disk Storage System Logical Unit Recognition
>
8.4 Rebooting the Linux Server
6-6
6-7
7
8
8.4
Rebooting the Linux Server
Reboot the Linux server.
Execution example
# shutdown -r now
8.5
Recognizing LUNs
After rebooting, check that the Linux server recognizes the ETERNUS Disk storage system
LUNs. At boot up, Linux automatically recognizes all SCSI disks and assigns them successive
device names starting from "sda". When assigning the device names, any internal SCSI disks
are assigned first, followed by the assignment of the ETERNUS Disk storage systems' LUNs. For
example, if there is one internal SCSI disk and three ETERNUS Disk storage system LUNs,
SCSI device names are assigned as follows:
SCSI device name
dev/sda
/dev/sdb
/dev/sdc
/dev/sdd
P3AM-4152-02ENZ0
ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux
(SUSE Linux Enterprise Server)
Enter the Password that is set in "Set iSCSI Port Parameters" of the ETERNUS Disk
storage system in "Password".
Click the [Next] button.
After both path logins have completed, check that the information of the desired
Target is visible in the "Connected Targets" of the iSCSI Initiator Overview.
Make sure that "Start-Up" for the desired Target is set to "automatic" (if currently
set to "manual", select the Target and click the [Toggle Start_Up] button), then
click the [Finish] button.
/dev/disk/by-id/scsi-
36003005700026cc011251e4b0b80ac59
/dev/disk/by-id/scsi-
3600000e00d0000000001000000000000
/dev/disk/by-id/scsi-
3600000e00d0000000001000000010000
/dev/disk/by-id/scsi-
3600000e00d0000000001000000020000
by-id name
20
End of procedure
Explanation
Internal SCSI disk
ETERNUS Disk storage systems'
LUN
Copyright 2010 FUJITSU LIMITED