Fujitsu ETERNUS4000 600 서버 연결 매뉴얼 - 페이지 22

{카테고리_이름} Fujitsu ETERNUS4000 600에 대한 서버 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS4000 600 32 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS4000 600에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

1. Chapter 4 Installing and Setting up Eternusmgr

Chapter 8

Install the Fibre Channel card driver, and the driver for ETERNUS Disk storage systems or either

the Windows Server® 2008 R2 or the Windows Server® 2008 standard multipath driver (msdsm)

on the server, and then perform configuration.

8.1

Fibre Channel Card Driver Installation

Refer to each "ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for

Windows® Driver Settings" for detailed setting procedures:

•

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®

8.2

Multipath Environment Configuration

Multipath environment configuration differs depending on the multipath driver that is used.

•

When using the multipath driver for ETERNUS Disk storage systems

Refer to

•

When using either the Windows Server® 2008 R2 or the Windows Server® 2008 standard

multipath driver (msdsm)

Refer to

Server® R2 or Windows Server® 2008" (page

8.2.1

Configuring ETERNUS Multipath or GR Multipath

Install the driver for ETERNUS Disk storage systems as required.

Refer to

cases such as when connecting the server to the ETERNUS Disk storage system in multipath

configuration and using the path redundancy control (path fail-over) function, and for when

single-path connection is used between the ETERNUS Disk storage system and server.

For the procedure about how to install (or uninstall), setup, and use the drivers for ETERNUS

Disk storage systems, refer to the software manuals.

P3AM-2922-05ENZ0

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®

Installing Drivers

Driver Settings for PRIMERGY/PRIMEQUEST 1000 Series

Driver Settings for PRIMEQUEST 500/400 Series

Driver Settings for Emulex Fibre Channel Cards

Driver Settings for QLogic Fibre Channel Cards

"8.2.1 Configuring ETERNUS Multipath or GR Multipath" (page

"8.2.2 Configuring the Standard Multipath Driver (msdsm) Environment for Windows

"3.4 ETERNUS Disk Storage System Driver Notes" (page 14)

23).

22).

for notes about drivers in