Fujitsu ETERNUS4000 model 300 서버 연결 매뉴얼 - 페이지 12

{카테고리_이름} Fujitsu ETERNUS4000 model 300에 대한 서버 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS4000 model 300 32 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS4000 model 300에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 서버 연결 매뉴얼 (25 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

1. Chapter 4 Installing and Setting up Eternusmgr

Chapter 3

Note the following issues when connecting the ETERNUS Disk storage system to a server.

3.1

Connection Notes for Windows Server® 2008 R2 and

Windows Server® 2008

Before the ETERNUS Disk storage system is connected to a server running Windows Server®

2008 R2 or Windows Server® 2008, the ETERNUS Disk storage system firmware should be

upgraded to a version that is Windows Server® 2008 R2 or Windows Server® 2008 compatible.

Refer to the "Server Support Matrix" for a list of usable ETERNUS Disk storage system firmware

versions.

3.2

Connection Notes for PRIMERGY/PRIMEQUEST

1000 Series

3.2.1

Connection Notes

•

The following operation conditions are recommended to maintain storage system reliability:

•

The following cluster configuration is supported for Windows®:

For details on servers which support cluster configuration, consult your FUJITSU sales represen-

tative.

3.2.2

When Installing Multiple Fibre Channel Cards

•

Only the same type of Fibre Channel cards can be installed together. Different types of Fibre

Channel cards cannot be mixed.

P3AM-2922-05ENZ0

ETERNUS Disk storage systems Server Connection Guide (Fibre Channel) for Windows®

Notes

Multiple paths

Use of drivers for ETERNUS Disk storage systems which support path redundancy control

Configure a multipath environment, and select a driver for ETERNUS Disk storage

systems which supports path redundancy control to increase redundancy and reliability of

the connection between the ETERNUS Disk storage systems and the server.

MSCS (Microsoft Cluster Service) configuration

WSFC (Windows Server Failover Cluster) configuration