Fujitsu ETERNUS8000 1100 연결 매뉴얼 - 페이지 11

{카테고리_이름} Fujitsu ETERNUS8000 1100에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS8000 1100 19 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS8000 1100에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지)

페이지 인쇄
Fujitsu ETERNUS8000 1100 연결 매뉴얼
Chapter 3 Setting Up the Server
>
3.1 Creating a WWN Instance Management Table for the Server
4-2
5
6
6-1
7
This completes the "WWN instance management table for the server".
P3AM-4562-01ENZ0
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
Use the following command to check the WWN of the Fibre Channel card that
corresponds to the physical path name. The result is displayed in the same order as
shown in
Step
4-1.
# prtpicl -v -c scsi-fcp | grep port-wwn
Example
# prtpicl -v -c scsi-fcp | grep port-wwn
:bfa0-port-wwn
:bfa1-port-wwn
Add the results in the "WWN instance management table for the server".
Example
Physical slot name
WWN
PCIE1
100000051ee7457b
PCIE2
100000051ee7457c
Check the controller number of the target connected to the Fibre Channel card.
Use the following command to check the controller number of the target connected to
the Fibre Channel card. The controller number corresponds to the physical path dis-
played in
Step
4-1.
# cfgadm -v
Example
Ap_Id
Receptacle
When
Type
c2
connected
unavailable
fc-fabric
c3
connected
unavailable
fc-fabric
Add the results in the "WWN instance management table for the server"
Physical slot name
WWN
PCIE1
100000051ee7457b
PCIE2
100000051ee7457c
10:00:00:05:1e:e7:45:7b
10:00:00:05:1e:e7:45:7c
Controller
Instance
name
name
bfa0
bfa1
Occupant
Condition
Busy
phys_ID
configured
unknown
n
/devices/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0:fc
configured
unknown
n
/devices/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0:fc
Instance
Controller
name
name
C2
bfa0
bfa1
C3
11
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
Information
.
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
End of procedure
Copyright 2010 FUJITSU LIMITED