Brother MFC-8510DN 매뉴얼 - 페이지 7

{카테고리_이름} Brother MFC-8510DN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8510DN 27 페이지. Printer
Brother MFC-8510DN에 대해서도 마찬가지입니다: 네트워크 매뉴얼 (29 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (25 페이지), 제품 안전 매뉴얼 (22 페이지)

Configuration for Scan to FTP using a Web Browser

Configuring the Scan to FTP Default Settings

Start your web browser.

Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is the

IP address of the machine or the print server name).



For example: http://192.168.1.2/

No password is required by default. If you have previously set a password, enter it and press

Click Scan.

Click Scan to FTP/Network Profile.

Choose the Profile you want to configure in Scan to FTP/Network Profile.

You can configure and change the following Scan to FTP settings.

1 Enter the name that you want to use for the profile of the FTP server. This name will be displayed on

the LCD of the machine and can be up to 15 characters.

2 The Host Address is the domain name of the FTP server. Enter the Host Address (for example

mypc.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).

3 Enter the Username and Password that has been registered with the FTP server for the machine (up

to 32 characters).

4 Enter the destination folder where your document will be stored on the FTP server (for example

brother\abc) (up to 60 characters).