Fujitsu ETERNUS8000 800 매뉴얼 - 페이지 18

{카테고리_이름} Fujitsu ETERNUS8000 800에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS8000 800 28 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS8000 800에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (25 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server

7.2 Setting Up the Server

P3AM-4182-03ENZ0

Server Connection Guide (iSCSI) for Oracle Solaris

Example:

CM0Port0: 192.1.1.120, CM1Port0: 192.1.1.121

# iscsiadm add discovery-address 192.1.1.120

# iscsiadm add discovery-address 192.1.1.121

Enable the connection to the iSCSI Target.

Enable the connection to the ETERNUS Disk storage system that is to be the iSCSI Tar-

get.

# iscsiadm modify discovery -t enable

Create an iSCSI device link.

# devfsadm -i iscsi

Check the ETERNUS Disk storage system.

Check the state of the ETERNUS Disk storage system disks using the "format" command.

Example: ETERNUS2000

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

1. c6t25d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,0

2. c6t26d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm00002,1

3. c6t27d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,0

4. c6t28d0 <FUJITSU-E2000-0000 cyl 510 alt 2 hd 64 sec 256>

/iscsi/[email protected]%3Astorage-system.e2000%3A00001001-cm10004,1

Specify disk (enter its number): Specify disk (enter its number):

End of procedure