Fujitsu ETERNUS8000 800 서버 연결 매뉴얼 - 페이지 12

{카테고리_이름} Fujitsu ETERNUS8000 800에 대한 서버 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS8000 800 25 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS8000 800에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 4

4.1

LAN Environment Notes

•

A dedicated iSCSI connection LAN is required, separate to the operation LAN and manage-

ment LAN.

•

The iSCSI connection LAN should only contain 1000BASE-T compatible devices.

•

When connecting the ETERNUS Disk storage system and server via a LAN switch, use a

VLAN or similar function to isolate this connection on a separate segment within the LAN

switch from other network or iSCSI access segments.

4.2

Server Startup and Power Supply Control Notes

Before turning the server on, check that the ETERNUS Disk storage systems and LAN switches

are all "Ready".

If the server is turned on and they are not "Ready", the server will not be able to recognize the

ETERNUS Disk storage systems.

Also, when the ETERNUS Disk storage system power supply is being controlled by a connected

server, make sure that the ETERNUS Disk storage system does not shut down before the con-

nected servers. Similarly, the LAN switches must also be turned off after the connected servers

have been shut down.

If turned off, data writes from the running server cannot be saved to the ETERNUS Disk storage

systems, and already saved data may also be affected.

4.3

SLES Notes

For details involving SLES, refer to the Novell web-site and any documentation available.

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

Notes