Fujitsu ETERNUS8000 900 서버 연결 매뉴얼 - 페이지 22

{카테고리_이름} Fujitsu ETERNUS8000 900에 대한 서버 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS8000 900 25 페이지. Disk storage systems (fibre channel) for oracle solaris
Fujitsu ETERNUS8000 900에 대해서도 마찬가지입니다: 매뉴얼 (28 페이지), 매뉴얼 (21 페이지), 서버 연결 매뉴얼 (32 페이지), 연결 매뉴얼 (19 페이지)

페이지 인쇄

Chapter 9 Setting Up and Checking the device-mapper multipath

9.2 Enabling the device-mapper multipath

9.2

Enabling the device-mapper multipath

Execute the following command to enable the device-mapper multipaths.

# insserv boot.multipath multipathd

# chkconfig multipathd on

# chkconfig boot.multipath on

# /etc/init.d/boot.multipath start

# /etc/init.d/multipathd start

9.3

Rebooting the Linux Server

Reboot the Linux server.

Execution example

# shutdown -r now

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

•

For SLES10

devices {

device {

vendor

product

prio_callout

path_grouping_policy

path_selector

failback

no_path_retry

}

For the ETERNUS2000, specify "E2000" as the "product" option.

For the ETERNUS4000, specify "E4000" as the "product" option.

For the ETERNUS8000, specify "E8000" as the "product" option.

The blacklist section is used to specify any internal disks or other devices that are to be

excluded from the multipath configuration. If required, refer to the Novell web-site for

details.

"FUJITSU"

"E2000"

"/sbin/mpath_prio_alua %d"

multibus

"round-robin 0"

immediate

End of procedure