Brother MFC-8710DW 매뉴얼 - 페이지 28

{카테고리_이름} Brother MFC-8710DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8710DW 30 페이지. Quick setup guide - english
Brother MFC-8710DW에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 빠른 설정 매뉴얼 (45 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄

Glossary

Wi-Fi Direct network terms

Group Owner (G/O)

If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi

Direct network. The G/O assigns a SSID name, password and IP address for the Wi-Fi Direct network. The

default setting is Off.

Device Information

Device Name

You can check the device name of the machine in the Wi-Fi Direct network environment. The device name

will be shown as HL-xxxx** or MFC-xxxx** (where xxxx is your model name and ** is the character string

assigned by your Brother machine).

SSID

This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the

SSID name.

IP Address

This field displays the current IP address of the machine assigned by the G/O.

Status Information

Status

This field displays the current Wi-Fi Direct network status. When your machine is a G/O, the machine shows

G/O Active(**) (where ** shows the number of devices). When your machine is a client, the machine

shows Client Active. If you see Off, your machine's Wi-Fi Direct interface is disabled.

Signal

This field displays the current Wi-Fi Direct network signal strength.

Channel (For HL-5470DW(T) and HL-6180DW(T))

This field displays the current Wi-Fi Direct network channel.

Speed (For HL-5470DW(T) and HL-6180DW(T))

This field displays the current Wi-Fi Direct network speed.