Brother MFC-8910DW 매뉴얼 - 페이지 29

{카테고리_이름} Brother MFC-8910DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8910DW 36 페이지. Quick setup guide - english
Brother MFC-8910DW에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (45 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (23 페이지)

Sending or Receiving (for DCP and MFC

models) an E-mail securely

You can configure secured E-mail sending with user authentication or E-mail sending and receiving (for DCP

and MFC models) using SSL/TLS on the Web Based Management screen.

Start your web browser.

Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP

address).



For example:

http://192.168.1.2/

No password is required by default. Enter a password if you have set one and press

Click Network.

Click Protocol.

Click Advanced Setting of POP3/SMTP and make sure that the status of POP3/SMTP is Enabled.

You can configure the POP3/SMTP settings on this page.

Note

• For more information, see the Help text in Web Based Management.

• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.

• If you do not know the POP3/SMTP server settings, please contact your system administrator or ISP

(Internet Service Provider) for details.

After configuring, click Submit. The Test E-mail Send Configuration or

Test E-mail Send/Receive Configuration screen appears.

Follow the instructions on-screen if you want to test with the current settings.