Fujitsu HandyDrive-5 운영 매뉴얼 - 페이지 4

{카테고리_이름} Fujitsu HandyDrive-5에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu HandyDrive-5 18 페이지. Usb mini-b

1. Plug the USB Mini-B end of the cable into the HandyDrive, and place the USB Series "A" plug

into the host computer.

2. MS Windows will detect the connection of a

"USB2.0

HandyDrive500" is ready for use. Depending upon the capacity, you will see the new

drive in the storage device list, e.g. Handy160 (D:)

3. Installation is complete, when the MS Windows

drive is ready for use.

Should the need arise to reset the partitions from the factory defaults; a Format & Partition

Utility is included with the bundled software package. See the next section of the manual for

the utility software operating procedure.

HandyDrive-5 - Operations Manual R.1

HandyDrive Installation Steps

"USB Mass Storage

Device", and report that

Found New Hardware

wizard reports that the