Brother MFC-8950DWT 매뉴얼 - 페이지 25

{카테고리_이름} Brother MFC-8950DWT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8950DWT 36 페이지. Laser printers
Brother MFC-8950DWT에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (44 페이지), 매뉴얼 (21 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (43 페이지), 제품 안전 매뉴얼 (23 페이지)

Printing documents securely using SSL

We recommend to use IPPS protocol for secure management. To use the IPPS protocol, the following

machine settings are required.

Note

• Communication using IPPS cannot prevent unauthorized access to the print server.

• You must also install the certificate you have installed to the machine onto your computer. See Installing

the self-signed certificate or pre-installed certificate onto Windows Vista

Server

2008 for users with administrator rights uu page 12 or Installing the self-signed certificate or

pre-installed certificate for Windows

• The IPPS protocol must be enabled. The default setting is enabled. You can change the IPPS protocol

settings and the certificate to use on the Web Based Management screen, by clicking Network, Protocol

and then HTTP Server Settings.

Windows

XP and Windows Server

Click Start and choose Printers and Faxes.

Click Add a printer to start Add Printer Wizard.

Click Next when you see the Welcome to the Add Printer Wizard screen.

Choose A network printer, or a printer attached to another computer.

Click Next.

Choose Connect to a printer on the Internet or on a home or office network and then enter the

following in the URL field:

"https://machine's IP address/ipp" (where "machine's IP address" is the machine's IP address or the

node name.)

Note

• It is important that you use "https://" and not "http://" otherwise printing over IPP will not be secure.

• If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can

also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names,

you can also enter the NetBIOS name of the print server. The NetBIOS name can be seen in the Network

Configuration Report. (To learn how to print the Network Configuration Report, see Printing the Printer

Settings Page (For HL-5450DN(T)) uu page 29 or Printing the Network Configuration Report (For other

models) uu page 29.) The NetBIOS name assigned is the first 15 characters of the node name, and by

default it will appear as "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless

network. ("xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)

XP and Windows Server

2003

, Windows

7 and Windows

2003 users uu page 14.